Yamaha WR250R 2010

Yamaha WR250R 2010 Specification data:

Engine
Type    250cc liquid-cooled DOHC 4-stroke; 4 valves

Bore x Stroke    77.0 x 53.6mm

Compression Ratio    11.8:1

Fuel Delivery    Fuel injection

Ignition    Direct ignition coil

Transmission    Constant-mesh 6-speed; multiplate wet clutch

Final Drive    Chain

Chassis
Suspension / Front    Inverted fork; fully adjustable, 10.6-in travel

Suspension / Rear    Single shock; fully adjustable, 10.6-in travel

Brakes / Front    Hydraulic single-disc brake, 250mm

Brakes / Rear    Hydraulic single-disc brake, 230mm

Tires / Front    80/100-21

Tires / Rear    120/80-18

Dimensions
Length    85.6 in

Width    31.9 in

Height    48.4 in

Seat Height    36.6 in

Wheelbase    55.9 in

Ground Clearance    11.8 in

Fuel Capacity    2.0 gal

Fuel Economy**    71 mpg

Wet Weight***    298 lb (California model 297 lb)

Directly descended from our YZ motocrossers and WR off-road machines—even the original Yamaha YA-1 of 1955—the WR250R is here to make Yamaha’s off-road prowess street accessible.
Not exactly an enduro model and not a streetbike either, the WR250R is for riders who ride off-road more than on. Its sibling, the supermoto-inspired WR250X, is for riders who spend more time on pavement.

250cc liquid-cooled, DOHC engine with two titanium intake valves and two steel exhausts, forged piston and plated cylinder for outstanding durability.
Pentroof combustion chamber with downdraft-type straight intake helps make excellent power across the rev band, with maximum power at 10,000 rpm.
First use of fuel injection on a 250 Yamaha on/off-road bike. The system relies on input from a crank sensor, intake air pressure sensor and throttle position sensor feeding a compact ECU to provide optimum combustion.
An ECU-controlled EXUP® exhaust valve, along with an electronic intake control valve, broadens the powerband.
High lift cams have WPC surface treatment in which the surface is sprayed with fine powder at over 100 meters per second to increase surface hardness.
Three-axis engine layout keeps the engine compact. Wet sump tucks between frame rails to keep the engine height down.
Rare earth-type ACM alternator keeps the weight down while providing all the current needed to run the FI and lighting systems.
Direct ignition coil sits atop the spark plug—another first on a Yamaha on/off-road model.
Six-speed gearbox provides a wide spread of ratios, with shower-type lubrication for reliability. A special light-action clutch makes shifting a snap.
Tucked-in, three-chamber muffler helps keep mass centralized and the bike quiet.
Electric start only: Leaving off the kickstarter keeps it light and simple.

YZ/WR250-inspired semi-double-cradle frame uses a main frame of cast and forged aluminum sections, with high-strength steel downtubes for excellent strength and rigidity characteristics.
Asymmetrical swingarm provides excellent strength/rigidity balance and a dynamic look. Cast aluminum crossmembers, extruded arms and a 22mm rear axle are carefully tuned for optimum handling.
Fully adjustable 46mm fork provides 10.6 inches of wheel travel. A forged lower triple clamp and a cast upper one help give outstanding front-end feel. An aluminum steering stem reduces weight.
Linkage-mounted rear shock provides 10.6 inches of travel with adjusters for compression damping, rebound damping and spring preload—and features a 14mm rod and 46mm cylinder for excellent damping and fade resistance.
Wave brake rotors front and rear, including a large 250mm front disc, reduce unsprung weight and provide excellent performance. Rear pedal is forged aluminum.

A slim, steel fuel tank is shaped with knee grip in mind, and the entire ergonomic layout is designed to make the rider feel like part of the bike.
Narrow, YZ-inspired seat features gripper-type cover for great seat-of-the-pants feel. Seat height is 36.6 inches.
WR enduro-style instrument panel provides excellent visibility in spite of the compact size. Basic mode provides speed, clock, tripmeter and self-diagnostic function. Measurement mode includes stopwatch, distance-compensating tripmeter, etc.
Minimalist front and rear fenders are designed for function, simplicity and lightness.
Bodywork with separate radiator heat outlet helps keep engine and rider cool.
Lightweight headlight and LED taillight maximize visibility and draw less current.
Adjustable front brake lever.

Source: Yamaha Motor USA